For a chauffeur day under the 150-air-mile short-haul exemption, the driver must return to the work reporting location and be released from work within 14 consecutive hours, with an exception for driver-salespersons. To set a realistic release time, work backward from that cutoff and leave room for the return trip, any remaining work and delays.

Which report time starts the clock?

Start with the time the driver reports for duty. Ask the operator for that time before you set the first pickup or commit to a late final stop. Build the itinerary around an earlier planned finish so the schedule has room to move.

For a hypothetical itinerary, assume the driver reports at 7:00 a.m., the first passenger pickup is at 8:00 a.m. and the operator has confirmed a 9:00 p.m. release cutoff. Now assume the group wants to move pickup to 8:30 a.m. and the operator confirms the report time and cutoff stay fixed. The group has half an hour less for the passenger itinerary. Look for a stop the group can shorten before agreeing to the later pickup.

Confirm that the operator is using the itinerary you actually want to run. Give them the pickup, all planned stops and the final drop-off, including any optional stop you want to keep available. Ask them to check the full route against the short-haul operating radius from the normal work reporting location. If you change the pickup time or add a stop, have them confirm the report time and review the finish again.

When does the driver finish after the last drop-off?

The driver's duty ends when the driver is relieved of all work and all responsibility for doing it. Ask the operator to walk through what the driver still needs to do after the last passenger gets out.

Put the passenger drop-off, return to the work reporting location and release in separate lines on the itinerary. At the drop-off, check whether the driver is expected to wait for someone, unload bags or handle a handoff. After the return, check whether there is any vehicle or end-of-day work to finish. Allow time for the tasks the operator identifies and use the end of the final task as the planned release.

Be specific when a pickup or drop-off time is open-ended. If the plan says the driver will wait until an event ends, agree on a latest departure time with the group. Decide in advance how passengers who want to stay later will get home.

How early should the final passenger drop-off be?

Work backward from the release cutoff by allowing time for the return trip, the driver's remaining work and a buffer for delays. Start with the operator's estimate for the return from your actual last stop. Then ask which part of the schedule they would adjust first if the group ran late.

For a hypothetical timing check, assume a 9:00 p.m. release cutoff, a final drop-off at 8:20 p.m., a 25-minute return trip and 10 minutes of work after the return. Adding the return and the work puts the planned release at 8:55 p.m., leaving five minutes before the cutoff. If you assume an 8:00 p.m. drop-off with the same return and work times, the planned release moves to 8:35 p.m., leaving 25 minutes.

To work backward in that hypothetical, keep the same assumed cutoff and durations and assume you want a 20-minute buffer. Subtract the buffer first to get an 8:40 p.m. target for release. Then subtract the remaining work to get an 8:30 p.m. target for arrival at the reporting location. Subtract the return trip to get an 8:05 p.m. target for the final drop-off. Put the drop-off target on the passenger itinerary and check the release target with the operator.

Use the example to check where you have flexibility on your own trip. You might bring the final pickup forward, skip an optional stop or arrange separate transport for passengers who want a later departure. After any change, have the operator update the return estimate and planned release, especially if the final drop-off location also changes.

How does off-duty time affect the plan?

Under the short-haul provision, a driver of a passenger-carrying commercial motor vehicle needs at least eight consecutive hours off duty separating each 14 hours on duty. If you want a late finish followed by an early airport pickup, give the operator both itineraries together and ask whether the same driver can cover them.

For a trip whose schedule depends on a particular driver, ask the operator to confirm the planned report and release times against the driver's assignments before and after yours. If someone quotes a different hour limit, ask what it measures and have the operator confirm the cutoff to use for the return and release. If the schedule needs to change, tell the operator which passenger commitments are fixed and which can move.

What times should you record for the chauffeur day?

The short-haul daily record includes the time the driver reports for duty and the total hours the driver is on duty that day. Write down the release as a separate clock time so you can see both when the driver finishes and how much duty time the operator has counted.

During planning, keep the expected release and the applicable cutoff side by side. If the trip runs late, ask for a revised return and release estimate while there is still a choice about the final stop. Share any change with whoever is coordinating the passengers so they can act on it before the group is ready to leave.

Before confirming the itinerary, send the operator your first pickup, final stop and any fixed departure times. Ask them to confirm the driver's report time, the required return location, the work left after the drop-off and the latest release they can plan for that day. Then agree on the latest passenger departure that gives the driver time to finish.